High resolution surface morphology of Kuoqionggangri Glacier (2020-2021)

The dataset includes three high-resolution DSM data as well as Orthophoto Maps of Kuqionggangri Glacier, which were measured in September 2020, June 2021 and September 2021. The dataset is generated using the image data taken by Dajiang Phantom 4 RTK UAV, and the products are generated through tilt photogrammetry technology. The spatial resolution of the data reaches 0.15 m. This dataset is a supplement to the current low-resolution open-source topographic data, and can reflect the surface morphological changes of Kuoqionggangri Glacier from 2020 to 2021. The dataset helps to accurately study the melting process of Kuoqionggangri Glacier under climate change.

0 2022-06-09

UAV remote sensing image and model product data set in demonstration area (2019-2021)

On October 24, 2019 and June 9, 2021, the special group conducted UAV flight operations in the debris flow gullies of Jilong gully, Tianmo gully and Guxiang gully in Bomi County, Nyingchi City, Tibet Autonomous Region, and generated the real three-dimensional model and digital surface model (DSM) of the debris flow gully in the demonstration area; In 2020, he worked in Kada village, Bomi county and generated real 3D model, digital surface model, digital orthophoto (DOM) and digital elevation model (DEM); On June 9, 2021, it was operated again in guxianggou to obtain the real 3D model and digital surface model. The spatial resolution of the above products is about 0.1M, and the main processing methods are as follows: (1) The real scene 3D modeling method based on UAV remote sensing can obtain rich texture information and generate dense 3D point clouds by using UAV photogrammetry technology. Combined with automatic real scene 3D modeling technology, the real 3D scene can be obtained. (2) The obtained three-dimensional model is optimized by cavity repair and filtering, which effectively fills the water cavity in the three-dimensional model. (3) Based on 3D modeling, DSM data of the demonstration area can be directly generated in CC. (4) Use mapmatrix to interpolate the polygon of DSM, erase the height of vegetation and other ground objects, and get DEM data. (5) The accuracy of 3D modeling is optimized by pricking operation.

0 2022-03-08