Soil Erodibility Dataset of Pan-Third Pole 20 countries (2020, with a resolution of7.5 arc second )

The soil erodibility factor (K) dataset of 20 countries in the Pan-third pole area is calculated based on the soil properties downloaded from website of the international soil reference and Information Center (ISRIC)(https://files.isric.org/soilgrids/latest/data/) with 7.5 arc second resolution, and the dataset used in the calculation include soil clay content (%), silt content (%), and sand content (%), soil organic carbon content (g / kg) and soil texture class. The soil erodibility factor algorithm proposed by Wischmeier (1978) in the second edition of USLE manual was used, and the soil erodibility factor calculation tool (k_tool) was developed, to generat the 1 arc second (about 25m) soil erodibility factor map. The soil erodibility factor data of Pan third pole 20 countries is not only the fundamental input for soil erosion rate calculation based on CSLE, but also the basic data for analyzing soil characteristics.

0 2021-10-11

Soil physical properties - soil bulk density and mechanical composition dataset of Tianlaochi Watershed in Qilian Mountains

A total of 137 soil samples of different vegetation types, different altitudes and different terrains were collected from June 2012 to August 2012. The soil layer of each sample point was divided into three layers of 0-10cm, 10-20cm and 20-30cm, with an altitude of 2700-3500m m. The vegetation types were divided into five types: Picea crassifolia forest, Sabina przewalskii, subalpine scrub meadow, grassland and dry grassland. At the same time of sampling, hand-held GPS is used to record the location information and environmental information of each sampling point, including longitude, latitude, altitude, slope, aspect, terrain curvature, vegetation type, soil thickness, maximum root depth, etc. Soil bulk density: The measurement method of soil bulk density is to put the sample into an envelope and dry it in an oven at 105℃ for 24 hours, then take it out and place it for 30 minutes to weigh. The ratio of the weighing result to the volume of the ring cutter is the soil bulk density, and the unit is g/cm3. Soil mechanical composition: hydrometer method is used to measure the soil mechanical composition, which includes the content of soil sand, silt and clay.

0 2020-03-15