This is the groundwater level observation data set of Selincuo Lake. It can be used in Climatology, Environmental Change, Hydrologic Process in cold regions and other disciplinary areas. The data is observed from June 20, 2017 to August 18, 2017. It is measured by automatic water gauge and a piece of data is recorded every 60 minutes. The data includes the water pressure and water temperature of the groundwater level observation point on the west bank of Selincuo Lake. The original data is precise, with the pressure accurate to 0.001kP and the water temperature 0.001℃. The original data forms a continuous time series after quality control. And the daily mean index data is obtained through calculation. The data is stored as an excel file.
This data includes the daily average water temperature data at different depths of Nam Co Lake in Tibet which is obtained through field monitoring. The data is continuously recorded by deploying the water quality multi-parameter sonde and temperature thermistors in the water with the resolution of 10 minutes and 2 hours, respectively, and the daily average water temperature is calculated based on the original observed data. The instruments and methods used are very mature and data processing is strictly controlled to ensure the authenticity and reliability of the data; the data has been used in the basic research of physical limnology such as the study of water thermal stratification, the study of lake-air heat balance, etc., and to validate the lake water temperature data derived from remote sensing and different lake models studies. The data can be used in physical limnology, hydrology, lake-air interaction, remote sensing data assimilation verification and lake model research.
The observation frequency is 1 time / 30 minutes with hobo automatic temperature recorder. No. 01: the observation point is located at the exit of zone III divided by Cold and Arid Regions Environmental and Engineering Research Institute, Chinese Academy of Sciences, and the boundary point between the cold desert zone and the cold meadow zone. The coordinates of the observation point (99 ° 53 ′ 37 ″ e, 38 ° 13 ′ 34 ″ n) are 100cm from the surface of the air temperature recorder. The observation period is from July 28 to September 2, 2012. No. 02: the observation point is located at the exit of No. 2 area divided by Cold and Arid Regions Environmental and Engineering Research Institute, Chinese Academy of Sciences, where the terrain is gentle, at the outlet of the alluvial delta valley where there is no other tributary flowing in. The observation point coordinates (99 ° 52 ′ 58 ″ e, 38 ° 14 ′ 36 ″ n) the temperature recorder in the air is 120cm from the ground surface. The observation period is from July 4, 2012 to September 6, 2012
This data set contains the daily values of water temperature and water level change in Ranwu Lake in Tibet from May 15, 2009, to December 31, 2016. Observation instrument model: an automatic HOBO water level and temperature logger U20-001-01; acquisition time: 30 minutes. The data were collected automatically. The observations and data collection were performed in strict accordance with the instrument operating specifications, and the data have been published in relevant academic journals. Data with obvious errors were removed, and the missing data were replaced by null values. Data collection location: Ranwu Lake, southeast Tibet Middle lake outlet: longitude: 96°46'16"; latitude: 29°29'28"; elevation: 3928 m. Lower Lake outlet: longitude: 96°38'52"; latitude: 29°28'52"; elevation: 3923 m. Laigu upper Lake: longitude: 94°49'49"; latitude: 29°18'07"; elevation: 4025 m. This data contains fileds as follows: Field 1: Site Number Data type: Alphanumeric characters (50) Field 2: Time Data type: Date type Field 3: Water temperature, °C Data type: Double-precision floating-point format Field 4: Relative water level, cm Data type: Double-precision floating-point format
The data set includes the vertical profile of water quality and the multi-parameter data of surface water quality of Selincho Lake during the investigation of the sources of rivers and lakes from June to July of 2017. The main water quality parameters measured are dissolved oxygen, conductivity, pH, water temperature, etc. YSI EXO2 water quality multi-parameter measuring instrument is calibrated according to lake surface elevation and local pressure before each measurement. The time interval of measurement is set at 0.25s, and the speed of putting in is slow, so he high continuity of data acquisition is guaranteed. The original data obtained include the measured data exposed to air above the water surface, which are eliminated in the later processing.
This is the water level observation data of Selincuo Lake. It can be used in Climatology, Environmental Change, Hydrologic Process in Cold Regions and other disciplinary areas. The data is observed from September 17, 2016 to February 15,2017. It is measured by automatic water gauge and a piece of data is recorded every 60 minutes. The data includes the water pressure and water temperature of the water level observation point on the east bank of Selincuo Lake.The original data is precise, with the pressure accurate to 0.001kP and the water temperature 0.001℃. The original data forms a continuous time series after quality control. And the daily mean index data is obtained through calculation. The data is stored as an excel file.
This is the water quality vertical slope data of Selincuo Lake during the River and Lake Source Investigation from June to July in 2017. The main water quality parameter observation data includes dissolved oxygen, electrical conductivity, PH, water temperature and others.
These are the water quality vertical slope data of Co Ngoin Lake obtained during the River and Lake Source Investigation from June to July in 2017. The main water quality observation data include dissolved oxygen, electrical conductivity, PH, water temperature and others.
This is the water quality data at depth of 2m, 15m, 18m, 28m, and 38m observed in Selincuo Lake from June to July, 2017. The data can be used in many fields, such as the physical and chemical properties of lakes and their climate response and lake environment changes.
This is the water quality multi-parameter data set of Ngangla Ringco Lake during the River and Lake Source Investigation in 2017. It is used to acquire basic physical and chemical indices of lakes. And it can prepare for the following modern observation studies of lakes. The data observed dates from August 29, 2017 to August 30, 2017. It is measured by the YSI EXO2 multi-parameter water quality instrument. Instrument calibration is made before each measurement based on the altitude of the lake and the local pressure. The measuring interval is 0.25s. To ensure the data is frequently and continuously acquired, the instrument is slowly released. The original data includes data measured above the water surface, which is exposed to the air, and it has all been eliminated in the post processing. The data is stored as an excel file.