This data includes the accessibility of 15 kinds of public facilities and services, such as roads and schools, in the communities of 1280 households at domestic and abroad, as well as the farmers' satisfaction with these public facilities and public services by comparing that with 3 years ago and current status with neighboring village. This data is used to support the analysis of the material capital part of sustainable livelihood. The data was collected by the research group through field survey in 2019. Before collecting the data, the research group and invited experts conducted a pretest and improved the survey questionnaire; Before the formal investigation, the members participating in the data collection were strictly trained; In the formal survey, each questionnaire is checked three times before it is filed. This data is of great value for understanding the physical capital accessibility and satisfaction of rural households in environment-economic fragile areas, and is an important supplement to national and macro data.
This project is based on the gsflow model of USGS to simulate the surface groundwater coupling in Zhangye basin in the middle reaches of Heihe River. The space-time range and accuracy of the simulation are as follows: Simulation period: 1990-2012; Simulation step: day by day; The spatial scope of simulation: Zhangye basin; The spatial accuracy of simulation: the underground part is 1km × 1km grid (5 layers, the total number of grids in each layer is 150 × 172 = 25800, among which the active grid 9106); the surface part is based on the hydrological response unit (HRU) (588 in total, each HRU covers an area of several square kilometers to dozens of square kilometers). The data include: surface infiltration, actual evapotranspiration, average soil moisture content, surface groundwater exchange, shallow groundwater level, simulated daily flow of Zhengyi gorge, simulated monthly flow of Zhengyi gorge, groundwater extraction and river diversion
1. Data overview: This data set is the daily scale groundwater level data of Qilian station from November 1, 2011 to December 31, 2011. In October 2011, two groundwater monitoring wells were arranged in hulugou small watershed. Well 1 is located beside the general control hydrological section of hulugou watershed, with a depth of 12.8m and an aperture of 12cm. Well 2 is located in the east of the Delta, about 100m away from the river, with a depth of 14.7m and an aperture of 12cm. 2. Data content: U20hobo water level sensor is arranged in the groundwater well, which is mainly used to monitor the change of groundwater level and temperature in hulugou small watershed. The data content is the temperature and atmospheric pressure inside the hole, and the data is the daily scale data. 3. Space time scope: Geographic coordinates of well 1: longitude: longitude: 99 ° 53 ′ E; latitude: 38 ° 16 ′ n; altitude: 2974m (near the hydrological section at the outlet of the basin). Geographic coordinates of well 2: longitude: 99 ° 52 ′ E; latitude: 38 ° 15 ′ n; altitude: 3204.1m (east side of the East Branch of the delta).
HAN Chuntan CHEN Rensheng SONG Yaoxuan LIU Junfeng YANG Yong QING Wenwu LIU Zhangwen
The surface air temperature dataset of the Tibetan Plateau is obtained by downscaling the China regional surface meteorological feature dataset (CRSMFD). It contains the daily mean surface air temperature and 3-hourly instantaneous surface air temperature. This dataset has a spatial resolution of 0.01°. Its time range for surface air temperature dataset is from 1979 to 2018. Spatial dimension of data: 73°E-106°E, 23°N-40°N. The surface air temperature with a 0.01° can serve as an important input for the modeling of land surface processes, such as surface evapotranspiration estimation, agricultural monitoring, and climate change analysis.
DING Lirong ZHOU Ji WANG Wei
The Land Surface Temperature in China STC dataset contains land surface temperature data for China (about 9.6 million square kilometers of land) during the period of 2003-2017, in Celsius, in monthly temporal and 5600 m spatial resolution. It is produced by combing MODIS daily data(MOD11C1 and MYD11C1), monthly data(MOD11C3 and MYD11C3) and meteorological station data to reconstruct real LST under cloud coverage in monthly LST images, and then a regression analysis model is constructed to further improve accuracy in six natural subregions with different climatic conditions.
WANG Xusheng HU Xiaonong
All data in this data set are original data, including meteorological and soil moisture content, stem sap flow, water potential of plant tissue, isotope characteristics of atmospheric and humidified water vapor, fluorescence tracer image, plant photosynthetic fluorescence, and basic data of five desert plants, Tamarix chinensis, Haloxylon ammodendron, Bawang, Nitraria tangutorum and red sand, which are related to field and indoor control experiments Because of the data of expression regulation. 1. Isotopic data of Tamarix chinensis. After humidifying for 1 hour, 2 hours and 3 hours, the tissue samples of indoor and outdoor plants of plexiglass were collected at the same time. The samples were put forward and processed by low-temperature vacuum distillation glass water extraction system, and then used euro The isotopic data were measured by ea3000 element analyzer and isoprime gas stability mass spectrometer. Tamarix Tamarix samples were collected from Sitan village, Jingtai County, including humidification and control samples. The variation data of isotopic composition can be used to determine the way and amount of water vapor absorbed by plant leaves. 2. Fluorescence section photo data: all the data in this data set are original data, including the structural photos under high-power microscope of Tamarix, Haloxylon ammodendron, Nitraria, Bawang, Hongsha and other desert plant leaves in Sitan village of Jingtai County and Ejin Banner. The specific method is as follows: apply fluorescent dye to the surface of desert plant leaves before humidification, collect plant leaves and stems after humidification for 1 hour, 2 hours and 3 hours, put them in liquid nitrogen, take them back to the laboratory, observe and take photos with fluorescence microscope. It can be used to analyze the tissue and organs of water absorption by desert plant leaves and the direction and path of water migration in plants. 3: Gene transcription and expression data: transcription and expression data of Tamarix chinensis, data collection time: May 25, 2014, location: Sitan village, Jingtai County, Gansu Province, data analysis platform: lllumina hisep TM 2000 platform, obtained by transcriptome analysis of baimaike company. 4. Photosynthetic and fluorescence data: photosynthetic and fluorescence parameters measured by photosynthetic apparatus in the field (Sitan village and Ejin Banner, Jingtai County). 5. Sap flow and environmental data: all data are original data. Sap flow data of desert plants measured by stem flow meter, including Tamarix chinensis, Haloxylon ammodendron, Nitraria tangutorum, red sand and other desert plants (Sitan village, Jingtai County and Ejin Banner), and environmental data monitored by automatic weather station, including temperature and humidity.
This data set includes the 2015 observation data of 9 water net nodes in the 5.5km × 5.5km observation matrix (red box in the thumbnail) of Yingke / Daman irrigation area in the middle reaches of Heihe River. The nine nodes contain 4cm and 10cm two-layer hydro probe II probes to observe the main variables such as soil moisture, soil temperature, conductivity and complex permittivity; the si-111 infrared temperature probe is set up at 4m height to observe the surface radiation infrared temperature of the underlying surface. The observation time frequency is 5 minutes. This data set can provide spatiotemporal continuous observation data set for remote sensing estimation of key water and heat variables of heterogeneous surface, remote sensing authenticity test, ecological hydrology research, irrigation optimization management and other research.
JIN Rui KANG Jian LI Xin MA Mingguo
The dataset is the field soil measurement and analysis data of the upstream of Heihe River Basin from 2013 to 2014, including soil particle analysis, water characteristic curve, saturated water conductivity, soil porosity, infiltration analysis, and soil bulk density I. Soil particle analysis 1. The soil particle size data were measured in the particle size laboratory of the Key Laboratory of the Ministry of Education, West Ministry of Lanzhou University.The measuring instrument is Marvin laser particle size meter MS2000. 2. Particle size data were measured by laser particle size analyzer.As a result, sample points with large particles cannot be measured, such as D23 and D25 cannot be measured without data.Plus partial sample missing. Ii. Soil moisture characteristic curve 1. Centrifuge method: The unaltered soil of the ring-cutter collected in the field was put into the centrifuge, and the rotor weight of each time was measured with the rotation speed of 0, 310, 980, 1700, 2190, 2770, 3100, 5370, 6930, 8200 and 11600 respectively. 2. The ring cutter is numbered from 1 to the back according to the number. Since three groups are sampled at different places at the same time, in order to avoid repeated numbering, the first group is numbered from 1, the second group is numbered from 500, and the third group is numbered from 1000.It's consistent with the number of the sampling point.You can find the corresponding number in the two Excel. 3. The soil bulk density data in 2013 is supplementary to the sampling in 2012, so the data are not available at every point.At the same time, the soil layer of some sample points is not up to 70 cm thick, so the data of 5 layers cannot be taken. At the same time, a large part of data is missing due to transportation and recording problems.At the same time, only one layer of data is selected by random points. 4. Weight after drying: The drying weight of some samples was not measured due to problems with the oven during the experiment. 3. Saturated water conductivity of soil 1. Description of measurement method: The measurement method is based on the self-made instrument of Yiyanli (2009) for fixing water hair.The mariot bottle was used to keep the constant water head during the experiment.At the same time, the measured Ks was finally converted to the Ks value at 10℃ for analysis and calculation.Detailed measurement record table refer to saturation conductivity measurement description.K10℃ is the data of saturated water conductivity after conversion to 10℃.Unit: cm/min. 2. Data loss explanation: The data of saturated water conductivity is partly due to the lack of soil samples and the insufficient depth of the soil layer to obtain the data of the 4th or 5th layer 3. Sampling time: July 2014 4. Soil porosity 1. Use bulk density method to deduce: according to the relationship between soil bulk density and soil porosity. 2. The data in 2014 is supplementary to the sampling in 2012, so the data are not available at every point.At the same time, the soil layer of some sample points is not up to 70 cm thick, so the data of 5 layers cannot be taken. At the same time, a large part of data is missing due to transportation and recording problems.At the same time, only one layer of data is selected by random points. 5. Soil infiltration analysis 1. The infiltration data were measured by the "MINI DISK PORTABLE specific vector INFILTROMETER".The approximate saturation water conductivity under a certain negative pressure is obtained.The instrument is detailed in website: http://www.decagon.com/products/hydrology/hydraulic-conductivity/mini-disk-portable-tension-infiltrometer/ 2.D7 infiltration tests were not measured at that time because of rain. Vi. Soil bulk density 1. The bulk density of soil in 2014 refers to the undisturbed soil taken by ring cutter based on the basis of 2012. 2. The soil bulk density is dry soil bulk density, which is measured by drying method.The undisturbed ring-knife soil samples collected in the field were kept in an oven at 105℃ for 24 hours, and the dry weight of the soil was divided by the soil volume (100 cubic centimeters). 3. Unit: G /cm3
The experimental data of Yingke Daman in Heihe River Basin is supported by the key fund project of Heihe River plan, "eco hydrological effect of agricultural water saving in Heihe River Basin and multi-scale water use efficiency evaluation". Including: soil bulk density, soil water content, soil texture, corn sample biomass, cross-section flow, etc Data Description: 1. Sampling location of Lai and aboveground biomass: Yingke irrigation district; sampling time: May 2012 to September 2012; Lai and aboveground biomass of maize were measured by canopy analyzer (lp-80), and aboveground biomass was measured by sampling drying method; sample number: 16. 2. Soil texture: Sampling location: Yingke irrigation district and Shiqiao Wudou Er Nongqu farmland in Yingke irrigation district; soil sampling depth is 140 cm, sampling levels are 0-20 cm every 10 cm, 20-80 cm every 20 cm, 80-140 cm every 30 cm; sampling time: 2012; measurement method: laboratory laser particle size analyzer; sample number: 38. 3. Soil bulk density: Sampling location: Yingke irrigation district and Daman irrigation district; sampling depth of soil bulk density is 100 cm, sampling levels are 0-50 cm and 50-100 cm respectively; sampling time: 2012; measurement method: ring knife method; number of sample points: 34. 4. Soil moisture content: this data is part of the monitoring content of hydrological elements in Yingke irrigation district. The specific sampling location is: Shiqiao Wudou Er Nongqu farmland in Yingke Irrigation District, planting corn for seed production; soil moisture sampling depth is 140 cm, sampling levels are 0-20 cm every 10 cm, 20-80 cm every 20 cm, 80-140 cm every 30 cm Methods: soil drying method and TDR measurement; sample number: 17. 5. Cross section flow: Sampling location: the farmland of Wudou Er Nong canal in Shiqiao, Yingke irrigation district; measure the flow velocity, water level and water temperature of different canal system sections during each irrigation, record the time and calculated flow, monitor once every 3 hours until the end of irrigation; sampling time: 2012.5-2012.9; measurement method: Doppler ultrasonic flow velocity meter (hoh-l-01, Measurement times: Yingke irrigation data of four times.
HUANG Guanhua JIANG Yao
This dataset includes three scenes, covering the artificial oasis eco-hydrology experimental area of the Heihe River Basin, which were acquired on (yy-mm-dd hh:mm, BJT) 2012-07-25 07:12, 2012-07-28 19:55, 2012-08-02 07:12. The data were all acquired at PingPong mode with product level of SLC, and these three images are of VV/VH, HH/HV and VV/VH polarization, respectively. COSMO-SkyMed dataset was acquired from Italian Space Agency (ASI) “COSMO-SkyMed project 1720: HYDROCOSMO” (Courtesy: Prof. Shi Jiancheng from the State Key Laboratory of Remote Sensing Science of China).
Agenzia Spaziale Italiana (ASI)
This dataset includes one scene acquired on (yy-mm-dd) 2012-09-06, covering the natural oasis eco-hydrology experimental area in the lower reaches of the Heihe River Basin. This datum contains panchromatic and multi-spectral bands, with spatial resolution of 2.5 m and 10 m, respectively. The data product level of this image is Level 1. QuickBird dataset was acquired through purchase.
China Centre for Resources Satellite Data and Application
This dataset includes one scene acquired on (yy-mm-dd) 2012-05-12, covering the Pailugou catchment. This datum is of panchromatic bands, with spatial resolution of 0.5 m. The data product level of this image is L2. WorldView dataset was acquired through purchase.
China Centre for Resources Satellite Data and Application
This dataset includes 44 scenes, covering the whole Heihe River Basin, which were acquired on (yy-mm-dd) 2012-08-25, 2012-09-03, 2012-09-08, 2012-09-13, 2012-09-18, 2012-09-23, 2012-09-28, 2012-10-03, 2012-10-13, 2012-10-18, 2012-10-22, 2012-11-01, 2012-11-11, 2012-11-21. The data are of multi-spectral bands with data product of Level 1. The spatial resolution is 1 m. ZY-3 dataset was acquired from purchase.
China Centre for Resources Satellite Data and Application
This dataset includes eight scenes, covering the artificial oasis eco-hydrology experimental area of the Heihe River Basin, which were acquired on (yy-mm-dd hh:mm) 2012-05-24, 2012-06-04, 2012-06-26, 2012-07-07, 2012-07-29, 2012-08-09, 2012-08-14, 2012-08-25. The data were all acquired around 19:00 (BJT) at StripMap mode with product level of MGD. Within them, the former six images are of HH/VV polarization with low incidence angle (22-24°), while the later two images acquired on 2012-08-14 and 2012-08-25 are of VV/VH polarization with higher incidence angle (39-40°). TerraSAR-X dataset was acquired from German Space Agency (DLR) through the general proposal of “Estimation of eco-hydrological variables using TerraSAR-X data in the Heihe River Basin, China” (project ID: HYD2096).
German Space Agency (DLR)
This is the MODIS data with 499 scenes covering the whole Heihe River basin in 2008 and 2009. The acquisition time is from 2008-04-23 to 2008-09-30 (295 scenes), and from 2009-05-01 to 2009-10-01 (204 scenes). MODIS data products have 36 channels with resolutions of 250m, 500m and 1000m respectively. The data format is pds, unprocessed, and the MODIS processing software is filed together with the original data. MODIS remote sensing data of Heihe Integrated Remote Sensing Joint Test are provided by Gansu Meteorological Bureau.
Gansu Meteorological Bureau
The dataset of CMA operational meteorological stations observations in the Heihe river basin were provided by Gansu Meteorological Administration and Qinghai Meteorological Administration. It included: (1) Diurnal precipitation, sunshine, evaporation, the wind speed, the air temperature and air humidity (2, 8, 14 and 20 o'clock) in Mazongshan, Yumen touwnship, Dingxin, Jinta, Jiuquan, Gaotai, Linze, Sunan, Zhangye, Mingle, Shandan and Yongchang in Gansu province (2) the wind direction and speed, the temperature and the dew-point spread (8 and 20 o'clock; 850, 700, 600, 500, 400, 300, 250, 200, 150, 100 and 50hpa) in Jiuquan, Zhangye and Mingqin in Gansu province and Golmud, Doulan and Xining in Qinghai province (3) the surface temperature, the dew point, the air pressure, the voltage transformation (3 hours and 24 hours), the weather phenomena (the present and the past), variable temperatures, visibility, cloudage, the wind direction and speed, precipitation within six hours and unusual weather in Jiuquan, Sunan, Jinta, Dingxin, Mingle, Zhangye, Gaotai, Shandan, Linze, Yongchang and Mingqin in Gansu province and Tuole, Yeniugao, Qilian, Menyuan, Xining, Gangcha and Huangyuan in Qinhai province.
Gansu meteorological bureau Qinghai Meteorological Bureau
Reservoir refers to the artificial water area formed in valley, river or low-lying area by dam, dike, sluice, weir and other projects. It is the main measure used for runoff regulation to change the distribution process of natural water resources and plays an important role in social and economic development. Many reservoirs have been built in Heihe River Basin, which has an important impact on the utilization of water resources in this area. In order to facilitate the mapping needs of users, we use topographic map and remote sensing image to prepare the reservoir distribution map of the Heihe River Basin. The location and shape of the reservoir are mainly obtained by manual interpretation based on Google map image, which basically shows the current situation of the reservoir distribution in the Heihe River Basin around 2010.
National Basic Geographic Information Center
On July 23, 1972, the United States launched the world's first resource satellite "Landsat 1" , and Landsat 2 and Landsat 3 were launched in the following 10 years. These three satellites were the first generation of resource satellites. They were equipped withreturn-beam vidicon cameras and multi-spectral scanners (MSS) with 3 and 4 spectral segments respectively, a resolution of 79m and a width of 185Km. There are 28 scenes of MSS data in Heihe River Basin currently which were obtained on the following dates: 1972-10-14, 1972-10-30, 1973-01-10, 1973-01-31, 1973-02-16, 1973-06-04, 1973. -10-07, 1973-10-28 (2 scenes), 1973-12-22, 1974-01-05, 1975-10-07, 1975-10-09, 1976-07-04, 1976-10-18 , 1976-11-07, 1976-11-27, 1976-12-30, 1977-01-19, 1977-02-07, 1977-04-20, 1977-05-06 (2 scenes), 1977-05 -08, 1977-06-10, 1977-06-29, 1977-07-18, 1978-10-09. Ortho rectification was performed on the images.
LP DAAC User Services
Data overview: This set of data mainly includes six prefecture level cities and 16 counties (Ganzhou District, Gaotai County, Shandan County, Minle County, Linze County, Sunan Yugu Autonomous County, Jinta County, Subei Mongolian Autonomous County, Suzhou District, Yumen City, Jiayuguan City, Yongchang County, Qilian County, Alxa Left Banner, Ejina Banner, Alxa Right Banner) in Heihe River Basin ）The 12 social and economic data are: GDP, output value of primary industry, output value of secondary industry, output value of tertiary industry, per capita GDP, per capita disposable income of urban residents, per capita net income of rural residents, fixed asset investment, total retail sales of social consumer goods, fiscal revenue, fiscal expenditure, and total grain output (including all kinds of work) Output of the product). It is divided into county level and township level. The data period is 2000-2009.
Railway distribution map is the basic data in the mapping process. In order to facilitate the use of users, we compiled the railway data set of Heihe River basin according to the railway data set distributed by the National Basic Geographic Information Center, the atlas of Gansu Province compiled by the Gansu Provincial map Geographic Information Center, the sky map and Guge map published by the China Surveying and Mapping Bureau. This data basically reflects the distribution of Railways around the Heihe River basin around 2010. The national standard of data classification and coding of national basic geographic information system - Classification and code of basic land information data (GB / T 13923-92) is adopted for railway coding, and the code is five digit code (National Basic Geographic Information Center 2010).
National Basic Geographic Information Center